DEQ Main Menu
Spills and Broken Thermometers
Even the smallest amount of mercury needs to be treated as a serious issue. Care must be taken not to touch the mercury.
Never use a vacuum cleaner to clean up mercury. The vacuum will put mercury into the air and increase exposure. The vacuum appliance will be contaminated and have to be thrown away.
Never use a broom to clean up mercury. It will break the mercury into smaller droplets and spread them.
Never pour mercury down a drain. It may lodge in the plumbing and cause future problems during plumbing repairs. If discharged, it can cause pollution of the septic tank or sewage treatment plant.
Never wash mercury-contaminated items in a washing machine. Mercury may contaminate the machine and/or pollute sewage.
Never walk around if your shoes might be contaminated with mercury. Contaminated clothing can also spread mercury around.
Any time one pound or more of mercury is released to the environment (outside air,water, soil, or sewer system), the spiller must call the National Response Center (NRC).
The NRC hotline operates 24 hours a day, 7 days a week. Call (800) 424-8802.
Note that because mercury is heavy, only two tablespoons of mercury weigh about one pound.
Remove everyone from the area where cleanup will take place. Shut door of impacted area. Turn off ventilation system. Do Not allow or gain assistance from children. Remember to remove all pets as well and remove all jewelry and watches from your hands as mercury will bond with the metal.
Mercury can be cleaned up easily from the following surfaces: wood, linoleum, tile and any other like surface.
If a spill occurs on carpet, curtains, upholstery or other like surface, these contaminated items should be thrown away in accordance with the disposal means outlined below. Only cut and remove the affected portion of the contaminated carpet for disposal.
Check List Items Needed to Clean Up a Small Mercury Spill
- 4 to 5 Ziplock-type Bags
- Trash Bags (2 to 6 mm thick)
- Rubber or Latex Gloves
- Paper Towels
- Cardboard or Squeegee
- Duct Tape, or Shaving Cream and Small Paint Brush
- Powdered Sulfur (optional)
Put on rubber or latex gloves.
If there are any broken pieces of glass or sharp objects, place them on a paper towel. Fold the paper towel and place in a zip lock bag. Secure the bag and label it.
Use a squeegee or cardboard to gather mercury beads, making slow sweeping motions to keep mercury from becoming uncontrollable. A flashlight can help locate additional glistening beads of mercury that may be sticking to the surface or in small cracked areas of the surface. Note:Mercury can move surprising distances on hard-flat surfaces, so be sure to inspect the entire room when “searching.”
Use the eyedropper to collect or draw up the mercury beads. Slowly and carefully squeeze mercury onto a damp paper towel. Place the paper towel in a zip lock bag and label it.
After you remove larger beads, put shaving cream on a small paint brush or duct tape and gently “dot” the affected area to pick up smaller hard-to-see beads. Place the paint brush or duct tape in a zip lock bag and secure. Make sure to label the bag as directed by your local health department or Utah DEQ.
It is optional to use commercially available powdered sulfur to absorb the beads that are too small to see. The sulfur does two things: (1) it makes the mercury easier to see since there may be a color change from yellow to brown and (2) it binds the mercury so that it can be easily removed and suppresses the vapor of any missing mercury. Where to get commercialized sulfur? It could be included in mercury spill kits, which can be purchased from laboratory, chemical supply and hazardous materials response supply manufacturers. Note: When using powdered sulfur, do not breathe in the powder as it can be moderately toxic. Powdered sulfur may also stain fabrics a dark color. Additionally, users should read and understand all product information before use. You may want to request the services of a contractor who has monitoring equipment to screen for mercury vapors. Consult your local health department or Utah DEQ to inquire about contractors in your area.
Place all materials used with the cleanup, including gloves, in a trash bag. Place all mercury beads and objects into the trash bag. Secure trash bag and label it as directed by your local health department or Utah DEQ.
Take the trash bag outside.
Wash your hands and face.
Contact your local health department for proper disposal in accordance with local, state and federal laws.
Remember to keep the area well-ventilated to the outside (i.e., windows open and fans running) for at least 24 hours after your successful cleanup. Continue to keep pets and children out of cleanup area. If sickness occurs, seek medical attention immediately. Recommendation: If there are young children or pregnant women in the house, seek additional advice from your local or state health department.
When a break happens on carpeting, homeowners may consider removing throw rugs or the area of carpet where the breakage occurred as a precaution, particularly if the rug is in an area frequented by infants, small children or pregnant women
Finally, if the carpet is not removed, open the window to the room during the next several times you vacuum the carpet to provide good ventilation.
Caution: The general public can clean up from flat surfaces small mercury spills no greater than the amount contained in a thermometer. If you estimate your mercury spill to be greater than the amount in a thermometer, isolate the contaminated area and call your local health department or Utah DEQ.
- Isolate the Area
- Turn Down the Temperature
- Open Windows
- Don’t Let Anyone Walk Through the Mercury
- Don’t Vacuum
- Contact your Local Health Department or Utah Department of Environmental Quality
Visit these sites or contact the following agencies about Mercury and Its Health and Environmental Effects:
Bear River Health Department
24-Hr Call Center: (1877) 229-8825
Central Utah Public Health Department
(435) 896-5451 or 5452
Davis County Health Department
Salt Lake Valley Health Department
24-Hr Emergency Response: (801) 313-6745
Southeastern Utah District Health Department
Southwest Utah Public Health Department
Summit County Public Health Department
(435) 615-3918 (Park City); (435) 336-3227 (Coalville)
Tooele County Health Department
Tri-County Health Department
Utah County Health Department
Utah Department of Environmental Quality
Environmental Hot line: (800) 458-0145
Wasatch County Health Department
24 Hr Contact: (435) 657-3264
Weber-Morgan Health Department