COVID-19: Offices of the Utah Department of Environmental Quality are open. In an effort to reduce the spread of COVID-19, we are limiting person-to-person contact. Please contact DEQ here to conduct business.

Permit (TEAD S): Tooele Army Depot

The former mission of the TEAD-S for the storage and demilitarization of chemical warfare agents has been completed. The TEAD-S has ongoing environmental restoration projects and the Army is currently seeking new projects to be conducted at the depot.

The TEAD-S Part B Hazardous Waste Storage (Not the Official Copy) Permit was issued in 1993, renewed in 2004 and renewed again in 2015. The Permit allows the storage of hazardous waste and regulates the clean up and restoration of contaminated sites at the depot.

A copy of the Environmental Indicators for Current Human Exposures Under Control and Migration of Contaminated Groundwater Under Control (538.78 KB) can be viewed on-line in PDF format.

Modules

  1. Standard Permit Conditions (244.70 KB)
  2. General Facility Conditions (55.39 KB)
  3. Containers (101.36 KB)
  4. Waste Piles (167.27 KB)
  5. Corrective Action (185.67 KB)
  6. Post Closure Conditions (676.38 KB)
    1. Attachment 1 (278.96 KB)
    2. Attachment 2 (493.55 KB)
    3. Attachment 3 (499.16 KB)
    4. Attachment 4 (510.15 KB)
  7. Open Detonation (91.00 KB)
      1. Attachment 1 OD Operations (1.01 MB)
      2. Attachment 2 OD Environmental Performance Standards (87.80 KB)
      3. Attachment 3 OD Unit Closure Plan (29.94 KB)

Attachments

  1. Waste Analysis Plan (269.79 KB)
  2. Inspection Plan (146.46 KB)
  3. Training Plan (139.92 KB)
  4. Contingency Plan (139.67 KB)
  5. Closure Plan (79.74 KB)
  6. General Facility Description (501.05 KB)
  7. Reserved (115.39 KB)
  8. Reserved (94.49 KB)
  9. Security Plan (19.84 KB)
  10. Preparedness and Prevention Plan (85.95 KB)
  11. Reserved (93.05 KB)
  12. Container Management (141.30 KB)
  13. Reserved (95.32 KB)
  14. Reserved (93.51 KB)
  15. Reserved (93.05 KB)

Comments or Questions

If you have any questions, please contact Rick Page at (801) 536-0230.